Conduction Reliability Evaluation System MLR
Conduction reliability evaluation system(measurement current: AC/DC)
MLR 22
- Micro resistance measurement system by AC/DC application (Kelvin bridge method)
- Micro resistance （100nΩ~2k Ω）can be measure with high speed （2sec/8ch）.
- Suitable for matrix evaluation on touch panel, evaluation for lead-free solder, conductive reliability for wire harness.
- As any value of DC current is set up to 100mA, DC voltage measurement is possible.
- By standard T type thermocouple, PT100, temperature measurement is possible.
- 1 board can be measured by 32CH. Maximum 8 board (maximum 256CH) can be installed main body.
| Measurement resistance range and measurement range |
AC resistance measurement |
DC resistance measurement |
DC Voltage measurement |
|||
|---|---|---|---|---|---|---|
| 2.0000kΩ | 100mΩ resolution |
200.00kΩ | 10Ω resolution |
10.000uA | 1nA resolution |
|
| 200.00 Ω | 10mΩ resolution |
20.000kΩ | 1Ω resolution |
100.00uA | 10nA resolution |
|
| 20.000 Ω | 1mΩ resolution |
2.0000kΩ | 100mΩ resolution |
1.0000mA | 100nA resolution |
|
| 2.0000 Ω | 100μΩ resolution |
200.00 Ω | 10mΩ resolution |
10.000mA | 1uA resolution |
|
| 200.00mΩ | 10μΩ resolution |
20.000 Ω | 1mΩ resolution |
100.00mA | 10uA resolution |
|
| 20.000mΩ | 1μΩ resolution |
− | − | − | − | |
| 2.0000mΩ | 100nΩ resolution |
− | − | − | − | |
Inquiries about these products : ETAC Division
Click here for inquiries
